A Step-by-Step Guide: How to Reset Oil Life on a Jeep Wrangler 2017

The 2017 Jeep Wrangler comes equipped with a myriad of indicator lights that’ll tell you when it’s time for service. So in this article today we will tell you how to reset oil life on a jeep wrangler 2017

Introduction

Maintaining regular oil changes is essential for the longevity and performance of your Jeep Wrangler 2017.

The vehicle’s oil life indicator serves as a helpful reminder, letting you know when it’s time to change the oil.

Once you’ve completed an oil change, it’s important to reset the oil life indicator to ensure accurate monitoring of future oil change intervals.

In this article, we will guide you through the process of resetting the oil life on your Jeep Wrangler 2017, ensuring that you can keep your vehicle running smoothly and efficiently.

Step 1: Prepare Your Vehicle

Before resetting the oil life, make sure your Jeep Wrangler 2017 is parked on a level surface and turned off. Engage the parking brake to ensure safety during the process.

READ ALSO: What You Need to Know Before Deciding Which Jeep Wrangler is the Best

Locate the vehicle’s OBD-II port, which is usually located beneath the steering column, near the driver’s side footwell.

Step 2: Turn on the Ignition

Insert the key into the ignition and turn it to the “On” position without starting the engine. This will power up the vehicle’s electronics, allowing you to access the necessary menus on the dashboard.

Step 3: Access the Settings Menu

Using the buttons on the steering wheel, scroll through the menu options until you find the “Settings” or “Vehicle Settings” option. Press the corresponding button to enter the settings menu.

Step 4: Locate the Oil Life Reset Option

Within the settings menu, navigate to the “Oil Life” or “Oil Life Reset” option. Again, use the buttons on the steering wheel to scroll through the available options until you find the correct one.

Step 5: Reset the Oil Life

Once you’ve selected the “Oil Life” option, press and hold the corresponding button (usually the “OK” or “Reset” button) until the oil life percentage starts to flash or reset. This indicates that the oil life has been successfully reset.

Step 6: Confirm the Reset

After resetting the oil life, the display may prompt you to confirm the reset. Follow the instructions on the screen, which usually involve pressing the “OK” button or a similar confirmation button. This step is important to ensure that the reset is complete and accurate.

Step 7: Verify the Reset

To confirm that the oil life has been successfully reset, check the oil life indicator on the dashboard. It should now display 100% or indicate a fresh oil change.

If the percentage remains unchanged or displays an error message, repeat the process from step 2 onwards.

Conclusion

Regularly resetting the oil life indicator on your Jeep Wrangler 2017 is a crucial step in maintaining its performance and reliability.

By following the step-by-step guide provided in this article, you can confidently reset the oil life indicator and ensure accurate monitoring of future oil change intervals.

Remember, regular oil changes are essential for keeping your engine running smoothly and preventing potential damage.

It’s always recommended to consult your vehicle’s owner’s manual for specific instructions, as the process may vary slightly depending on the model and year of your Jeep Wrangler.